Microfluidic Flow Cell Tools
|
|
In order to immobilize molecules or cells in microfluidic channels, the flow-through system should be
designed such that it can be closed and opened again. It would be also ideal if one and the same
fluidic system could be utilized for different analytical (e.g., electrochemical or optical) methods
by very simple modification and also allow efficient cleaning.
For this purpose, provided are flow-through chambers with removable coverslips for the microscope. These flow cells are mounted in seconds and can be applied in cell imaging or single molecule fluorescence. If needed, electrical signals can be transferrd or optical fibers mounted.
Layout and assembly of the microsystem can be modified in a wide range. So in addition to PDMS, other materials can be used and microvalves and microelectrodes can be integrated. Due to the easy and modular setup, even the most complicated methods in screening and nanotechnology can be realized.
Our approach is to provide modular solutions for microstructuring that are complementary to the microfluidic applications that we work with. Provided are numerous approaches towards developing 3-dimensional surface topographies. These systems are developed for precision liquid handling for microscopic imaging and can be integrated with the Nano-Plotter platform.
Catalog
- Syringe Pump Modules for Microfluidic Flow Cells
- A050-007: Syringe Module Fluidic Processor, standard
- A050-008: Syringe Module Fluidic Processor, Two Channel
- A050-005: Syringe Module Fluidic Processor, Four Channel
- A110-015: Smart Valve Upgrade, 4-port
- PDMS Flow Cell Casting Station
- A040-033: PDMS Flow Cell Casting Station
- A040-030: Silicon Master Chip, Structure Height 2-50 µm
- A040-031: Silicon Master Chip, Structure Height 50-150 µm
- A040-091: Channel Spacer
- Mechanical Components
- A040-109: Flow Cell Transparent PMMA Lid: 22x22 mm
- A040-110: Flow Cell Transparent PMMA Lid: 22x50 mm
- A040-018: Flow Cell Support, standard aluminum, for microscope stages
- A040-019: Flow Cell Support, with Multi-Electrode Interface
- Accessories
- A040-080: Hydrogel Microvalve PV5, PEEK housing
- A040-081: Hydrogel Microvalve PV6, PEEK housing
- A040-100: Hydrogel Microinjector PV6, PEEK housing
- A040-101: Hydrogel Microvalve PV6, naked chip
- A040-084: Flow Cell Sample Carrier
- Flow Cell Channel Plate
- A040-105: Flow Cell Channel Plate 22x22 mm, recycled
- A040-106: Flow Cell Channel plate 22x22 mm, new
- A040-107: Flow Cell Channel Plate for Sample Carrier
- A040-108: Flow Cell Channel Plate 22x50 mm, new
- A040-111: Flow Cell Channel Plate 22x50 mm, recycled
- A040-112: Flow Cell Channel Plate 22x22 mm with 4 electrodes
- Consumables
- A040-026: Glass Slide, with SiR microfluidic channel
- A040-027: Coverslip (150 µm) with Pt electrodes and SiR channel
- A040-044: Coverslip (150 µm) glass, customized size
- A040-102: Coverslip (150 µm) with platinum electrodes
- A040-103: Coverslip (150 µm) with ITO electrodes
- A040-104: Coverslip (150 µm) with SiO - passivated Pt electrodes
- A660-300: MicCell PDMS Syringe, 5 ml
- A660-301: MicCell PDMS Syringe, 1 ml
- A660-302: MicCell Injection Needles
- A660-303: MicCell PDMS Mixing Glass
- Flow Cell Software