Washing pipettes

From LabBot
Revision as of 21:52, 23 September 2020 by Richard (talk | contribs) (LabAutoBox Pipette Washing Example)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

LabAutoBox Pipette Washing Example

Here is an example of how the wash station works. The pipettes tip move into the wash basin and are washed outside by fluid when the washing pump is turned on. The excess fluid is drawn into the waste basin and this goes to waste. While the tips are being washed on the outside there syringe pump is perfusing fluid out of the inside of the pipettes.


Here is a video demonstrating how a macro can be put together using the LabAutoBox software



//wash pipettes object 200 microl cycles  dry on
G1Z0F3000
G1X236Y37F3000
G1Z25F3000
//set all valves to input
valve-1_1_1_1_1_1_1_1-input
wasteon
washon
sg1e200s40a20_7
valve-1_1_1_1_1_1_1_1-output
sg1e0s40a20_7
washoff
wasteoff
//set all valves to bypass
valve-1_1_1_1_1_1_1_1-bypass
touchdry Z9.5F3000ZT0T0.1